Public COA audit
BPC-157
Audited July 29, 2026
Several fields check out, but we found issues worth reviewing before you rely on this document.
- Legitimacy
- 92
- Confidence
- 88%
- Panels
- 2/7
- Purity (printed)
- 99.58%
Document details
Fields extracted from the certificate — not order or payment data.
- Batch / lot
- 129992
- Identity method
- HPLC-UV-MS
- Sample date
- 2025-11-05
- Issue date
- 2025-11-17
7-panel checklist
Had data + good, had data + bad, reported without pass/fail, or missing. Missing lowers thoroughness — you decide whether that panel matters; PeptIQ’s score still factors coverage.
2 of 7 present · 2 passed · 0 failed · 0 reported · 5 missing
Missing is a thoroughness gap — not automatically bad. PeptIQ’s legitimacy score still weighs panel coverage; you can down-weight panels that don’t matter for your use case.
Identity
Tested · passed · core
Compound identity confirmed (e.g. HPLC, mass spec).
ID Confirmed
Purity
Tested · passed · core
Reported purity percentage for the analyte.
99.58%
Heavy metals
Not on this COA
Lead, arsenic, cadmium, mercury, or similar limits.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Microbial
Not on this COA
Bioburden / microbial limits testing.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Endotoxin
Not on this COA · core
LAL or chromogenic endotoxin assay.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Sterility
Not on this COA
Sterility testing where applicable.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
Residual solvent / water
Not on this COA
Residual solvents or water content limits.
No evidence for this panel. That lowers thoroughness — whether it matters depends on what you care about.
How to read this
Had data · good
Panel present with a pass (or clear acceptance).
Had data · bad
Panel present with a fail — a concrete quality signal.
Had data · unclear
Value reported without an explicit pass/fail mark.
Missing
Not on this certificate. Lowers thoroughness; you decide if that panel matters for your use case. PeptIQ’s score still factors coverage.
Findings
Evidence-linked observations from this audit.
High chromatographic purity
99.58% purity by HPLC-UV/MS with clean chromatogram showing single dominant peak at retention time ~5.23 minutes
Identity confirmed by mass spectrometry
Mass spectrum shows expected m/z 711 matching BPC-157 reference standard with good spectral overlay
Total peptide mass within specification
10.6 mg measured vs 10 mg label claim (105.7% of label), within acceptable range
Clear batch identification
Lab # 129992, Project 135460, sample ID bwrxnfq clearly stated
Appropriate timeline
Sample received 11/5/2025, tested 11/11/2025, report issued 11/17/2025 - reasonable 12-day turnaround
Established laboratory
Krause Analytical LLC is a known third-party testing laboratory in Austin, TX with verifiable address and contact information
Verification URL provided
Certificate includes verification URL https://finnrick.com/verify with certificate ID bwrxnfq
Limited testing panels
Only identity and purity testing performed. Methods for endotoxins and heavy metals are described on page 3 but no results are shown, suggesting these tests were not conducted for this sample
Professional presentation
Multi-page report with chromatogram, mass spectrum data, methods summary, signature from Laboratory Director Mark C. Krause, and appropriate disclaimers
Dual branding
Document shows both Finnrick Analytics and Krause Analytical branding, suggesting Finnrick may be a reseller/distributor using Krause as the testing lab
PeptIQ COA reports analyze document content and publicly verifiable lab signals. They are educational and not a guarantee of product quality, legality, or safety. Always consult a qualified professional before making health decisions. We never publish purchase prices, shipping details, or uploader identity.